6 x Ezy Anchor Outback Screw Peg - 200mm - Orange

The Outback Screw peg is designed for those who spend the majority of their time travelling within Australia and away from the Coastal soils, it is designed for areas such as The Far Outback and Centre of Australia. It is designed for the hard red dirt and gravelly surfaces found in these areas.

Installation:

1. Use your cordless drill or impact driver
2. Connect the Torx driver bit to your drill/driver and secure in the chuck
3. Pick up your Ezy Anchor with screw in position through the Ezy Anchor
4. Connect your guy rope to the hook
5. Hold the guy rope and hook together with your guiding hand
6. Pick up the drill and driver in your driving hand
7. Insert the Torx driver into the head of the screw
8. Place drill in forward drilling position
9. Commence drilling the screw downward into the earth keeping the EzyAnchor parallel to the earth so the screw penetrates at its set angle.
10. Installation complete

If you are unlucky enough to hit a solid object while installing the screw, remove it and reposition in another location in proximity to the original required position.

Removal:

1. Using your cordless drill or impact driver connect the Torx bit driver to the screw head.
2. Hold the hook and guy rope in one hand, place drill in reverse and unscrew.
3. Removal complete